Opens in a new tab

Penn State Worry Questionnaire:
Scoring and Interpretation

The Penn State Worry Questionnaire (PSWQ) is a 16-item self-report measure of habitual worry. Penn State Worry Questionnaire scoring hinges on reverse coding five items before summing, so the key, SPSS and R code, interpretation limits, psychometric evidence and a model reporting paragraph are set out here.

ITEMS16
SUBSCALESNone in the standard total
RESPONSE SCALE1 to 5, not typical to very typical
SCORE RANGE16 to 80
DEVELOPEDMeyer et al., 1990

What the Penn State Worry Questionnaire Measures

The PSWQ measures the general tendency to worry excessively and uncontrollably, as a trait, rather than the severity of any single recent episode of worry. Meyer, Miller, Metzger and Borkovec (1990) developed the 16-item self-report scale, and it is widely used in research on generalized anxiety disorder, although a PSWQ total is not diagnostic by itself.

Worry is linked to anxiety disorders, illness concerns and stress, so the PSWQ is useful when worry is a predictor, a moderator or an intervention outcome. Factor-analytic work shows that the reverse-worded items can behave differently from the positively worded ones. A factor solution from an exploratory analysis may therefore reflect response wording as much as substantive dimensions, which is one reason correct keying matters before any modeling.

Structure of the PSWQ

  • Items: sixteen self-reported statements, each rated from 1 to 5.
  • Item order: in the original ordering, items 1, 3, 8, 10 and 11 are reverse scored. Check that your form follows the same sequence before applying this key.
  • Response scale: 1 to 5, from not at all typical to very typical, so a higher raw number means more typical worry before the five reversals.
  • Subscales: none in the standard score. A reverse-wording factor can appear in factor analyses, but it is not necessarily a substantive subscale.
  • Total: one summed score from 16 to 80.
  • Recall period and unscored items: no fixed recall window (the scale targets usual, trait-level worry) and no unscored items.
  • Translations: use a validated version for the intended population and name the language and its source. If no validated translation exists, say so and describe how the version was adapted.

The instrument itself is available from the original Meyer et al. (1990) publication and research measure repositories.

How to Score the PSWQ

  1. Confirm that variables pswq1 to pswq16 follow the original item sequence and are coded 1 to 5.
  2. Reverse items 1, 3, 8, 10 and 11 as 6 minus the response, so that a higher value always means more worry.
  3. Sum the 16 keyed item scores to obtain pswq_total, which ranges from 16 to 80.
  4. Apply a missing-item rule. The code below requires all 16 items, and skipped items must never be treated as zero. No developer-endorsed prorating rule was verified, so any other rule must be prespecified, justified and reported in the methods section.
SPSS SYNTAX

* Illustrative syntax: variables must already be valid item scores (1 to 5).
* Original item ordering: reverse items 1, 3, 8, 10, 11.
DO REPEAT x = pswq1 pswq3 pswq8 pswq10 pswq11 / y = pswqr1 pswqr3 pswqr8 pswqr10 pswqr11.
  COMPUTE y = 6 - x.
END REPEAT.
COMPUTE pswq_total = SUM.16(pswqr1, pswq2, pswqr3, pswq4, pswq5, pswq6, pswq7, pswqr8, pswq9, pswqr10, pswqr11, pswq12, pswq13, pswq14, pswq15, pswq16).
EXECUTE.
R

# data: one row per respondent; items pswq1 to pswq16 coded 1 to 5.
# Original item ordering: reverse items 1, 3, 8, 10, 11.
items <- paste0("pswq", 1:16)
scored <- data[items]
rev_items <- c(1, 3, 8, 10, 11)
scored[rev_items] <- lapply(scored[rev_items], function(x) 6 - x)
data$pswq_total <- rowSums(scored, na.rm = FALSE)

Interpreting PSWQ Scores

Score band Interpretation
16 to 80 Continuous trait worry; higher = greater tendency to worry
Clinical threshold No single validated threshold applies to all populations and versions

Source: Meyer et al. (1990).

A higher PSWQ total indicates more pervasive or uncontrollable worry in a respondent’s usual experience. The score is dimensional, so a universal cut-off should not be inferred from a convenient number. If your study applies a published cut-off, report the validation population, its sensitivity and specificity, and the reference standard it was checked against.

The five reverse-worded items are a frequent source of recoding mistakes, and a wrongly keyed total can still fall inside the possible 16 to 80 range. Verify the version, the item order and the direction of all sixteen variables against the codebook before analysis.

Psychometric Properties

Property Published finding Source
Internal consistency The development paper reported high internal consistency; the coefficient varies by sample, so report your own estimate Meyer et al. (1990)
Test-retest reliability The development paper reported good stability over retest intervals of weeks; the coefficient depends on the sample and interval Meyer et al. (1990)
Construct validity Designed to measure trait worry and to separate it from related anxiety constructs Meyer et al. (1990)
Factor structure Reverse-worded items may cluster because of item wording, which complicates factor interpretation Subsequent validation literature
Diagnostic accuracy No single transportable screening cut-off for all populations and versions Meyer et al. (1990)

These are source-specific results and cannot be assumed to hold as reliability or accuracy estimates in a new sample.

Using the PSWQ in a Study

Use the PSWQ total when your research question concerns the degree of habitual worry. If you model change, ask whether a scale built for trait worry should be expected to move within the time frame of your study. In factor analysis, treat wording effects as a competing explanation for apparent factors rather than reading each cluster as a distinct construct.

Report reliability from your own sample after the reverse coding has been checked, and examine missing-data patterns before choosing a handling rule. Define the primary outcome in advance, and plan sample size around the precision or model complexity of your main analysis rather than a generic participant-to-item ratio.

Reporting the PSWQ

Trait worry was measured with the 16-item Penn State Worry Questionnaire (PSWQ; Meyer et al., 1990). Each item was rated from 1 to 5, and items 1, 3, 8, 10 and 11 were reverse coded before summing to a total of 16 to 80, with higher scores indicating greater worry. Internal consistency in the present sample was [α = XX], and missing responses were handled by [method].

References

Meyer, T. J., Miller, M. L., Metzger, R. L., & Borkovec, T. D. (1990). Development and validation of the Penn State Worry Questionnaire. Behaviour Research and Therapy, 28(6), 487-495. https://doi.org/10.1016/0005-7967(90)90135-6

Frequently Asked Questions

Items 1, 3, 8, 10 and 11, provided your form follows the original item order. Match the item numbers to the questionnaire your participants actually completed.

Check the reverse coding first, then missing values and whether your version has the same item sequence as the original. A wrongly reversed item lowers alpha and misleads.

No. It measures the tendency to worry, and a clinical diagnosis requires other evidence.

Yes. A correctly computed total can be used in suitable regression and longitudinal models. Inspect the reverse-worded items when your question depends on the factor structure.

NEXT STEP

Need a PSWQ Score Set Up
or Checked?

OnlineSPSS is a statistical consultancy for researchers. Share your design and dataset, and a statistically trained Research Coordinator reviews it. The scope and one fixed project fee are confirmed before work begins.

No Commitment Required

Strictly Confidential

Fixed Project Fee

In-House PhD-Level Statisticians

Same-Day Response

Serving Researchers Since 2014