Opens in a new tab

DES-II:
Scoring and Interpretation

The Dissociative Experiences Scale-II (DES-II) is a 28-item self-report measure of how often people report dissociative experiences. DES-II scoring is a mean of percentage ratings, not a sum, so this guide sets out the 0 to 100 total, why it is a screening and research score and not a diagnosis, SPSS and R code, and a model reporting paragraph.

ITEMS28
SUBSCALESNone standard
RESPONSE SCALEFrequency percentages, 0 to 100
SCORE RANGE0 to 100 (mean)
DEVELOPEDBernstein and Putnam, 1986

What the DES-II Measures

The DES-II assesses how frequently people report experiences such as detachment, absorption, memory discontinuity and alterations of awareness. These range from common everyday phenomena to more clinically relevant dissociation. The scale was first described by Bernstein and Putnam (1986), and Carlson and Putnam (1993) later reviewed the scale and its response format.

It is a screening and research scale and not a diagnostic interview. A high mean points to frequent dissociative experiences that may warrant further clinical assessment, but it cannot establish dissociative identity disorder or any other diagnosis. Research uses include trauma studies, community surveys and clinical characterization of dissociation.

Structure of the DES-II

  • Items: 28 frequency ratings, each expressed as a percentage of the time, usually from 0 to 100.
  • Score: the conventional total is the arithmetic mean of all 28 items, so it stays on the 0 to 100 scale.
  • Subscales: amnesia, absorption and depersonalization or derealization factors, and the DES Taxon (DES-T), are sometimes analyzed. They are not interchangeable with the overall mean and need an explicit item key and validation evidence.
  • Direction: no reverse-scored items. Higher values mean more frequent dissociative experiences.
  • Response format: forms with response steps of different sizes must be recoded to comparable 0 to 100 values before means are calculated. The revised DES-II differs from the earlier DES.
  • Translations: use a validated version for the intended population and name the language and its source. If no validated translation exists, say so and describe how the version was adapted.

The instrument itself is available through the original DES publications (Bernstein & Putnam, 1986; Carlson & Putnam, 1993).

How to Score the DES-II

  1. Confirm that the dataset holds 28 items, each stored as a percentage from 0 to 100.
  2. Calculate the mean across all 28 items to obtain desii_mean, which ranges from 0 to 100. It is an average of percentages, not a sum.
  3. Keep optional factor or subtype scores separate, and include them only with a validated item mapping.
  4. Treat any screening rule as a screening aid and not as a diagnostic algorithm.
  5. Apply a missing-item rule set by the protocol. No developer-endorsed prorating rule was verified, so the code below requires all 28 ratings. Report how missing responses were handled, and never substitute zero for an unanswered percentage.
SPSS SYNTAX

* Illustrative syntax: des1 to des28 hold raw percentages from 0 to 100.
COMPUTE desii_mean = MEAN.28(des1 TO des28).
EXECUTE.
R

# data: one row per respondent; items des1 to des28 as percentages 0 to 100.
items <- paste0("des", 1:28)
stopifnot(all(vapply(data[items], function(x) all(is.na(x) | (x >= 0 & x <= 100)), logical(1))))
data$desii_mean <- rowMeans(data[items], na.rm = FALSE)

Interpreting DES-II Scores

Score or category Interpretation
0 to 100 mean Higher values indicate more frequent dissociative experiences
Any proposed screening threshold Requires validation in the target population
Diagnostic status Not determined by the DES-II alone; needs structured clinical assessment

Source: Bernstein & Putnam (1986); Carlson & Putnam (1993).

A person with many high ratings may have clinically important symptoms, but common absorption-like experiences can also raise the mean. Report the population, the justification for any cutoff, and the intended role of the instrument, screening or outcome. Distribution plots and group comparisons are often more transparent than labeling every high scorer as having a dissociative disorder.

The DES-II is not a stand-alone diagnosis, and it captures experiences of varying clinical meaning. Do not read it as a direct measure of trauma exposure.

Psychometric Properties

Property Published finding Source
Original development The 1986 paper established the dissociation construct with early reliability and validity evidence Bernstein & Putnam (1986)
Expanded review The 1993 update synthesized further reliability, norm and validity findings Carlson & Putnam (1993)
Test-retest reliability A clinical sample showed a test-retest correlation of .93 for the total score; this estimate is population-specific Dubester & Braun (1995)
Factor structure Amnesia, absorption and depersonalization or derealization have been analyzed; separate factor scores need validation Carlson & Putnam (1993)
Diagnostic validity Screening performance should be evaluated against a specified diagnostic interview in the target sample Carlson & Putnam (1993)

These are source-specific findings for a given population and version. They cannot be assumed to hold as reliability or accuracy estimates in a new sample.

Using the DES-II in a Study

The DES-II mean is often suitable as a continuous outcome or explanatory variable. Check for strong right skew, excess zeros or clinically meaningful clusters, and consider a robust regression or another prespecified method where they appear. Do not transform or dichotomize merely to reach statistical significance.

If participants are assessed repeatedly, retain respondent IDs and visit dates and use methods that account for within-person dependence. Document the language and response format, because a score computed from a 0 to 10 raw scale cannot be reported as a 0 to 100 score without conversion. Report internal consistency from your own sample.

Reporting the DES-II

Dissociative experiences were measured with the 28-item Dissociative Experiences Scale-II (DES-II; Bernstein & Putnam, 1986; Carlson & Putnam, 1993). Participants rated the frequency of each experience as a percentage, and the mean of the 28 item ratings gave a total score (range = 0 to 100), with higher scores indicating more frequent dissociative experiences. Scores were analyzed [continuously or with a justified screening threshold]. Internal consistency in this sample was [estimate], and missing responses were handled by [method].

References

Bernstein, E. M., & Putnam, F. W. (1986). Development, reliability, and validity of a dissociation scale. The Journal of Nervous and Mental Disease, 174(12), 727-735. https://doi.org/10.1097/00005053-198612000-00004

Carlson, E. B., & Putnam, F. W. (1993). An update on the Dissociative Experiences Scale. Dissociation, 6(1), 16-27.

Dubester, K. A., & Braun, B. G. (1995). Psychometric properties of the Dissociative Experiences Scale. The Journal of Nervous and Mental Disease, 183(4), 231-235. https://doi.org/10.1097/00005053-199504000-00008

Frequently Asked Questions

Average them. The conventional total is a mean percentage from 0 to 100.

No. A high score can prompt further assessment, but it is not a diagnosis.

Yes, with an analysis suited to the distribution of the scores and the study design.

Only if they serve the research question and rest on an identified item map with validation evidence.

NEXT STEP

Need DES-II Data Scored
or Checked?

OnlineSPSS is a statistical consultancy for researchers. Share your design and dataset, and a statistically trained Research Coordinator reviews it. The scope and one fixed project fee are confirmed before work begins.

No Commitment Required

Strictly Confidential

Fixed Project Fee

In-House PhD-Level Statisticians

Same-Day Response

Serving Researchers Since 2014